C6 EVO IoT (Internet of Things) Receiver, simply the smart evolution of theC6 EVO with even more forward-looking features.
The interactive functionality of the LCD screen remains and a WEB connection is added, which via a dedicated APP allows remote management of the menu and notifications.
This is the only system on the market that combines voice calls, SMS and notifications at the moment of delivery, as well as allowing continuous software updates via the WEB.
C6 EVO IoT is an evolution of the C6 EVO, an alarm system useful for monitoring the final stage of equine pregnancies.
In addition to having all the features described about the C6 EVO, this one is distinguished by the ability to be connected to a server and to be managed from a smartphone via the C6 IoT APP.
This product, when IoT technology worldwide has now become standard, represents the top of its class currently on the market.
The GSM system with LTE technology and global module enables good worldwide coverage.
Configuration, monitoring and testing via the APP makes the system extremely easy and intuitive to use.
Triple notification (Voice, SMS, APP) increases the security of event reception.
As indicated in the user manual, during the period of non-use, we recommend leaving the system on charge for at least 24 hours every 15 days by connecting the power supply to the mains and with the switch set to ON; this will allow the battery to be fully maintained.
The following checks are considered to have been carried out with the original power supply connected to the mains and the C6 EVO, and the switch set to ON.
Check that the mains power supply is present and that the power plug is correctly inserted, or that the internal battery is charged; if the problem persists, send the complete appliance and accessories in for repair.
The power supply unit is defective or lacks power, replace the power supply unit with an original one.
System crashed, switch off and on again .
This is normal when the power supply is not connected or there is a lack of power; the ‘Wait to Call’ time expresses the seconds until the telephone alert to numbers that have ‘NETWORK’ enabled in the memory.
The inserted SIM card has no signal or is expired or damaged. Always insert the SIM card when the receiver is switched off.
WiFi (Access Point) is absent, out of range or correct credentials have not been entered
Wifi password entered incorrectly or wrong data line chosen
Not connected to any WiFi
The presence of the green dot on either scale means that the connection to the server is active, on the SIM when on the upper scale, on WIFI when on the lower scale.
When the receiver is no longer connected to the 220V mains via its power supply, the battery symbol appears on the screen, coloured green when the voltage value is sufficient to operate the system, red when the voltage value is insufficient.
Check that you are in range.
Check operation with another sensor and if it works with the latter, send the worn-out sensor to the supplier for exchange (usually every two years anyway, it is recommended to do this even if it is apparently not malfunctioning, the batteries inside have a natural self-discharge even if the device is not used).
Check whether the internal LED lights up when the magnet is removed from the sensor, otherwise the sensor is exhausted.
In this condition, the stored numbers will receive the message “LOW BATTERY , POWER OFF” and then the receiver will switch off. It will be necessary to restore the 220V mains supply by checking that the yellow LED above the CHARGE sign is lit. Switch the receiver off and on again.
© 2024 Foaling Alarm – Brand di Sisteck Srl – All rigths reserved – Powered by Seo Siti Marketing – VAT NUMBER / CF: IT03965290368
